Product Installation Instructions for Ignition Coil for Chainsaw Models MS170 MS180

Required Tools:

1. Screwdriver Set: A set of Phillips and flathead screwdrivers for removing any screws.
2. Socket Wrench: A socket wrench with the appropriate size socket to remove bolts if necessary.
3. Pliers: To help with gripping and pulling any tight connectors or wires.
4. Cleaning Cloth: For cleaning any dirt or debris around the ignition area before installation.
5. Safety Gloves: To protect your hands during the installation process.
6. Safety Glasses: To protect your eyes from debris while working on the chainsaw.

Installation Steps:

1. Preparation: Ensure the chainsaw is turned off and disconnected from any power source. Allow it to cool if recently used.
2. Remove the Engine Cover: Using a screwdriver, carefully remove screws or bolts holding the engine cover in place. Keep screws in a safe location for reinstallation.
3. Access the Ignition Coil: Locate the existing ignition coil. It may be mounted on the engine block. Disconnect any wires attached to the old ignition coil.
4. Remove the Old Ignition Coil: Using the screwdriver or socket wrench, remove the bolts securing the old ignition coil and gently lift it out.
5. Install the New Ignition Coil: Position the new ignition coil in place, aligning it with the mounting holes. Secure it using the original bolts and ensure it’s snugly fitted.
6. Reconnect the Wires: Attach the wires to the new ignition coil as per the original configuration. Ensure secure connections to avoid any electrical issues.
7. Reattach the Engine Cover: Place the engine cover back on the chainsaw and secure it with the screws or bolts you previously removed.
8. Final Check: Before using the chainsaw, double-check that all connections are secure and that there are no tools left inside the area.
9. Test the Chainsaw: Start the chainsaw to ensure the new ignition coil is functioning correctly and the chainsaw operates smoothly.

Safety Precautions:

• Always wear safety gloves and glasses during installation.
• Ensure the chainsaw is off and disconnected from any power source before starting the installation.
• Work in a well-ventilated area to avoid inhaling fumes.

By following these instructions and using the required tools, you can successfully install the ignition coil and enhance the performance of your MS170 or MS180 chainsaw.