Product Installation Instructions for Motorcycle Oil Filter Screw Set for C400GT 650 Non Polar SR4Max C400x

Tools Required:

1. Socket Wrench Set (including 8mm and 10mm sockets)
2. Torque Wrench
3. Screwdriver Set (Flathead and Phillips)
4. Oil Filter Wrench
5. Pliers
6. Clean Cloth or Paper Towels
7. Oil Pan (to catch any spills)
8. Safety Gloves
9. Safety Goggles

Installation Steps:

1. Preparation:

   • Ensure your motorcycle is on a stable and flat surface.
   • Turn off the engine and allow it to cool down completely.
   • Wear safety gloves and goggles to protect yourself during the process.

2. Remove the Old Oil Filter:

   • Use the oil filter wrench to carefully unscrew the old oil filter.
   • Place an oil pan underneath to catch any residual oil that may spill out.
   • Wipe the surface around the oil filter attachment with a clean cloth.

3. Install the New Oil Filter:

   • Take the new oil filter and apply a little new oil to the rubber O-ring. This will help ensure a proper seal.
   • Screw the new oil filter into place by hand until it is snug, and then tighten it gently with the oil filter wrench (do not over-tighten).

4. Attach the Oil Filter Screw Set:

   • Locate the screws that need to be replaced with the new screws from the screw set.
   • Using the socket wrench, remove the existing screws one at a time.
   • Install the new screws from the screw set. Use the torque wrench to tighten them to the manufacturer’s recommended torque specifications.

5. Final Checks:

   • Inspect your installation to ensure that everything is securely fastened.
   • Clean any spilled oil and ensure nothing is blocking the motorcycle components.
   • Double-check that no tools are left on or around the motorcycle.

6. Test the Installation:

   • Start the motorcycle and let it idle for a few minutes.
   • Look for any signs of leaks around the oil filter and screws.
   • If everything is in order, your installation is complete.

Notes:

• Always dispose of old oil and filters in an environmentally responsible manner.
• Refer to the motorcycle’s owner’s manual for specific torque specifications and maintenance recommendations.

Following these instructions will help ensure a proper installation of the Motorcycle Oil Filter Screw Set for your C400GT 650 Non Polar SR4Max C400x. Enjoy your ride!