Product Installation Instructions for Metal Racing Wheel Tires Upgrade (8.5mm Width, 27mm Outer Diameter) Compatible with 1/28 RC Cars

Required Tools:

1. Screwdriver Set: A small Phillips or flathead screwdriver, depending on your RC car model’s screws.

2. Hex Wrench/Allen Key: If your RC car uses hex screws for the wheels, ensure you have the correct size.

3. Pliers: To assist in removing any stubborn wheel connections.

4. Tire Removal Tool (Optional): If available, this tool can help you safely pry the existing tires off without damage.

5. Cleaning Cloth: To clean any debris or dirt from the wheel axles before installation.

6. Lubricant (Optional): A small amount of lubricant can be used to ensure smoother wheel movement if needed.

Installation Steps:

1. Prepare Your Workspace: Ensure you have ample space and good lighting to work on your RC car.

2. Remove Existing Wheels:

   • Use the screwdriver or hex wrench to remove the screws holding the existing tires in place.
   • Carefully pull the tires off the wheels, using pliers if necessary.

3. Clean the Wheel Axles:

   • Wipe down the wheel axles with a cleaning cloth to remove any dirt or debris.

4. Install New Tires:

   • Take your new Metal Racing Wheel Tires and align them with the wheel hub.
   • Firmly push the tires onto the wheel until they fit snugly.

5. Secure the Tires:

   • Replace the screws or any locking mechanisms you removed earlier to secure the new tires in place. Ensure they are tight but not overly so, as this can damage the wheels.

6. Test the Installation:

   • Gently spin the wheels to ensure they rotate freely and check for proper alignment.
   • If needed, apply a small amount of lubricant for smoother operation.

7. Final Checks:

   • Ensure all screws are secure, and the tires are properly seated.
   • Your upgraded wheels are now ready for use on the racetrack or for everyday driving.

Enjoy enhanced grip and improved handling with your new Metal Racing Wheel Tires!