Drone Controller Thumb Stick Replacement Kit for Mavic Mini SE: Installation Instructions

Tools Required:

1. Phillips screwdriver (small size)
2. Flathead screwdriver (optional)
3. Tweezers (optional)
4. Soft cloth or mat (to protect the controller surface)

Installation Steps:

1. Prepare Your Workspace:

   • Choose a clean, flat surface to work on. Use a soft cloth or mat to protect your controller from scratches.

2. Gather Tools:

   • Ensure you have all the required tools on hand: a small Phillips screwdriver, and optionally, a flathead screwdriver and tweezers.

3. Remove the Original Thumb Sticks:

   • Locate the thumb sticks on your Mavic Mini SE remote controller.
   • Using the Phillips screwdriver, carefully remove the screws holding the original thumb sticks in place. Place the screws in a safe location for reinstallation.

4. Install the New Thumb Sticks:

   • Take the new thumb sticks from the replacement kit.
   • Align the new thumb sticks with their respective positions on the controller.
   • Press them gently into place ensuring they fit snugly.

5. Secure the Thumb Sticks:

   • Using the Phillips screwdriver, reinstall the screws you previously removed. Make sure they are tightened securely, but do not over-tighten to avoid any damage.

6. Adjust the Thumb Sticks (if applicable):

   • If your new thumb sticks have adjustable features, follow the instructions provided in the kit to customize their settings according to your preference.

7. Test the Installation:

   • Before using the controller, test the thumb sticks to ensure they move freely and respond correctly to input.
   • Check for proper functionality by powering on the controller and ensuring no error messages appear.

8. Cleanup:

   • Clean up your workspace, making sure to properly dispose of any packaging materials and screws that are no longer needed.

By following these simple steps, you will successfully replace the thumb sticks on your Mavic Mini SE controller, enhancing your drone operation experience. Enjoy your flying!