Product Installation Instructions for Fuel Pump Filter Compatible with 6C5 13915 00

Compatible Models:
This fuel pump filter is compatible with several 4-stroke outboard motors, including F40, F50, F60, F70, F100, FT50, FT60, F75, F80, F90, and F100 (Part Number: 881323001).

Installation Tools Required:

1. Screwdriver Set: A set of screwdrivers (flathead and Phillips) to remove screws and covers.

2. Wrench Set: A set of wrenches for loosening and tightening nuts and bolts in the fuel system.

3. Fuel Line Pliers: For disconnecting the fuel lines safely without causing damage.

4. Shop Towels/Rags: To clean any spills and maintain a tidy workspace.

5. Safety Goggles: To protect your eyes from any fuel splashes.

6. Gloves: To keep your hands clean and protected while handling fuel and components.

7. Container for Fuel: To safely store any fuel that may drain from the system during installation.

Installation Steps:

1. Preparation: Ensure the engine is turned off and cooled down. Disconnect the battery to prevent any electrical issues during installation.

2. Accessing the Fuel Filter: Use a screwdriver and wrench to remove any covers or components blocking access to the fuel filter.

3. Disconnecting the Fuel Lines: Use the fuel line pliers to carefully detach the fuel lines from the old filter. Be cautious of any remaining fuel in the lines.

4. Removing the Old Filter: Unscrew or unclip the old filter from its mounting.

5. Installing the New Filter: Position the new fuel pump filter in place, ensuring it is correctly aligned as per the original filter. It should fit precisely without forcing it.

6. Reconnecting the Fuel Lines: Reattach the fuel lines securely to the new filter, ensuring there are no leaks.

7. Reassembling the Components: Replace any covers or components that were removed, securing them with the screws and bolts.

8. Final Checks: Reconnect the battery, turn on the engine, and check for any leaks around the new filter and fuel lines.

9. Test Run: Start the engine and let it run for a few minutes to ensure optimal performance and that everything is functioning correctly.

Note:
Always refer to the original equipment manufacturer’s manual for specific instructions and safety warnings regarding your outboard motor. Proper installation is crucial for ensuring effective fuel filtration and optimal engine performance.