Installation Instructions for the 295W Moving Beam Stage Light

Introduction:
Thank you for purchasing the 295W Moving Beam Stage Light. This guide will walk you through the installation process, ensuring you get the best performance from your light. Please read all instructions carefully before starting.

Tools Required:

1. Philips Screwdriver
2. Adjustable Wrench
3. Allen Wrench (included)
4. Level (for proper alignment)
5. Safety Gloves
6. Safety Goggles
7. Extension Cord (if needed)

Preparation:

1. Select the Installation Location:

   • Ensure the area is suitable for a stage light installation.
   • Check for adequate electrical outlets nearby.

2. Inspect the Light:

   • Before installing, inspect the stage light for any damages during shipping.

Installation Steps:

1. Attach the Adjustable Bracket:

   • Use the included Allen wrench to attach the adjustable bracket to the light fixture. Ensure it is securely fastened.

2. Choose a Mounting Position:

   • Decide whether to mount it on a truss or a ceiling. If using a truss, ensure it can support the weight of the light.

3. Securely Mount the Light:

   • Using the adjustable wrench, fasten the light to the truss or designated mounting area. Ensure it is tightly secured and can bear the weight without any wobbling.

4. Align the Light:

   • Use a level to ensure the light is straight and properly aligned. Adjust as necessary.

5. Cable Management:

   • Carefully organize and secure power cables to prevent tripping hazards. Make sure cables are away from any heat sources.

6. Connect the Power:

   • Connect the stage light to a compatible power outlet using an extension cord if needed. Ensure that the electrical system is grounded.

7. Final Check:

   • Double-check all screws and fittings to ensure everything is tight and secure.
   • Wear safety gloves and goggles while handling the installation to protect yourself.

Testing the Light:

• Once installed, turn on the power and conduct a test run. Adjust the beam angle and other features to ensure it is functioning correctly.

Note:
For any troubleshooting, refer to the user manual or contact customer support. Enjoy your new 295W Moving Beam Stage Light and elevate your events with stunning visuals!

Safety Precautions:

• Always adhere to safety standards while using the stage light.
• Do not expose the light to moisture or extreme temperatures.
• Ensure regular maintenance for longevity and optimal performance.

Thank you for your purchase!