Product Installation Instructions for Mud Guards for 250F, 600F, 900F, and 1300 Motorbikes

Tools Required:

1. Phillips head screwdriver
2. Flat screw headdriver
3. Allen wrench set (if applicable)
4. Socket wrench set (if applicable)
5. Measuring tape (optional for alignment)
6. Clean cloth or rag for wiping the area

Installation Steps:

1. Preparation:

   • Ensure that the motorcycle is parked on a stable, flat surface.
   • Make sure the area where you will be working is clean and free from debris.
   • Gather all the tools listed above and the mud guards.

2. Remove Existing Components (if necessary):

   • If your motorcycle has existing mud guards or components that may interfere with the installation, use the appropriate tools (screwdriver, socket wrench, etc.) to remove them carefully.

3. Align the Mud Guards:

   • Take the mud guards and hold them in place against the designated mounting area on your motorcycle.
   • Ensure that they are properly aligned and that the holes for screws or bolts match the mounting points on your bike.

4. Attach the Mud Guards:

   • Begin to insert the screws/bolts into the aligned holes.
   • Use a Phillips screw headdriver for screws or an Allen wrench/socket wrench for bolts, depending on what is provided with the mud guards.
   • Tighten each screw/bolt gradually to ensure an even fit. Do not over-tighten as this may damage the mud guards or your motorcycle.

5. Final Adjustments:

   • Double-check the alignment of the mud guards once they are attached.
   • Make any necessary adjustments to ensure they sit flat and are securely fastened.

6. Clean-Up:

   • Wipe down any areas around the installation with a clean cloth.
   • Dispose of any packaging materials and old components properly.

7. Final Check:

   • Before taking your motorcycle out for a ride, perform a quick safety check to ensure the mud guards are securely installed and functioning as intended.

Enjoy your newly installed mud guards, designed to protect your motorcycle while adding a touch of color!