Product Installation Instructions for Air Element Oil Filter

Compatible with 125-150cc Motorcycle Engines

Tools Required:

1. Wrench Set - To remove and install the oil filter and drain plug.
2. Oil Filter Wrench - For easier removal of the old oil filter.
3. Screwdriver - If your motorcycle has screws that need to be removed for access.
4. Drain Pan - To collect the old oil during the oil change process.
5. Gloves - To keep your hands clean during the installation.
6. Rags/Paper Towels - For cleaning up any spills and wiping down surfaces.
7. New Engine Oil - To refill the engine after replacing the oil filter.
8. Funnel - To make pouring new oil into the engine easier.

Installation Steps:

1. Prepare Your Motorcycle
   Make sure your motorcycle is on a flat surface and securely supported. Turn off the engine and let it cool down.

2. Drain the Old Oil
   Place the drain pan underneath the oil pan. Use the wrench to remove the drain plug and allow the old oil to fully drain out.

3. Remove the Old Oil Filter
   Use the oil filter wrench to unscrew the old oil filter. Make sure to keep it oriented upright to avoid spilling any remaining oil.

4. Prepare the New Oil Filter
   Before installing the new oil filter, apply a small amount of new oil to the rubber gasket on the top of the filter. This ensures a good seal.

5. Install the New Oil Filter
   Screw the new oil filter into place by hand. Do not overtighten; refer to the manufacturer's guidelines for proper tightness.

6. Reinstall the Drain Plug
   Once the old oil is fully drained, reinstall the drain plug and tighten it securely.

7. Add New Engine Oil
   Use the funnel to pour in the new engine oil through the oil fill cap. Refer to motorcycle your's manual for the correct oil type and amount.

8. Check for Leaks
   Start the engine and let it run for a few minutes. Check for any oil leaks around the new oil filter and drain plug.

9. Dispose of Old Oil and Filter
   Properly dispose of the old oil and oil filter according to local regulations.

By following these instructions, you will ensure that your new Air Element Oil Filter is correctly installed, helping to extend the life and performance of your motorcycle engine. Happy riding!