Product Installation Instructions for Air Filter Cover (650EXI, 675EXI, 675IS Lawn Mowers)

Tools Needed:

1. No additional tools required for installation
2. Clean cloth (for wiping any debris)
3. Replacement air filter (if necessary)

Installation Steps:

1. Preparation:

   • Before starting, ensure that your lawn mower is turned off and the engine is cool.
   • Disconnect the spark plug for safety.

2. Remove the Old Air Filter Cover:

   • Locate the air filter cover on your lawn mower.
   • Gently pull or unscrew the existing cover to remove it. If it’s stuck, use a clean cloth to get a better grip.

3. Inspect the Air Filter:

   • Take out the air filter from its compartment.
   • Check its condition. If it’s dirty or damaged, replace it with a new one.

4. Install the New Air Filter Cover:

   • Place the new air filter cover (part number 594575) over the air filter compartment.
   • Ensure it aligns perfectly with the fitting grooves designed for the 650EXI, 675EXI, and 675IS models.

5. Secure the Cover:

   • Press or screw the air filter cover into place until it fits snugly.
   • Make sure there are no gaps or loose edges.

6. Final Check:

   • Reconnect the spark plug.
   • Start the lawn mower to ensure proper installation and check for any unusual noises.

7. Maintenance Tip:

   • Regularly check your air filter and cover for optimal performance. Replace as needed to ensure longevity of your lawn mower.

Enjoy a well-maintained lawn mower with enhanced performance through this easy installation process!