Installation Instructions for Compatible Fuel Pump

Tools Required:

1. Screwdrivers (Phillips and Flathead)
2. Wrenches (Adjustable and/or specific size for your motorcycle)
3. Pliers
4. Fuel Line Clamps
5. Rags (for cleaning spills)
6. Container (for catching any fuel drips)
7. Safety Goggles (for eye protection)
8. Gloves (to protect your hands)

Installation Steps:

1. Preparation:

   • Ensure the motorcycle is on a stable and level surface.
   • Disconnect the battery to avoid any electrical issues.

2. Drain Fuel:

   • If necessary, drain the fuel from the tank into a safe container to prevent spills during the installation.

3. Access the Fuel Pump:

   • Remove the seat or side panels as needed to access the fuel pump.
   • Depending on your motorcycle model, you may need to remove bolts or screws.

4. Disconnect the Old Fuel Pump:

   • Carefully disconnect the fuel lines from the old pump, using fuel line clamps as needed.
   • Remove any electrical connectors attached to the fuel pump.

5. Install the New Fuel Pump:

   • Position the new compatible fuel pump in place.
   • Connect the electrical connectors securely.
   • Reattach the fuel lines, ensuring they are secured properly.

6. Check for Leaks:

   • Before reassembling, it’s advisable to turn the ignition on (without starting the engine) to pressurize the system.
   • Check for any leaks around the new fuel pump and connections.

7. Reassemble the Motorcycle:

   • Once you confirm there are no leaks, reattach any panels or the seat that were removed.
   • Reconnect the battery.

8. Test the Installation:

   • Start the engine and allow it to idle for a few minutes.
   • Check again for any signs of leaking fuel.

9. Dispose of Waste Properly:

   • Dispose of any leftover fuel and rags according to local regulations to ensure proper environmental care.

With these steps, you can successfully install the Compatible Fuel Pump on your motorcycle or scooter, ensuring reliable performance and extended service life. Enjoy riding!