Installation Instructions for Performance Oxygen Sensor

Compatible with RT Roadster Model 12345

Tools Required:

1. Oxygen Sensor Socket - A specialized socket designed for removing and installing oxygen sensors.
2. Ratchet Wrench - To operate the oxygen sensor socket.
3. Extension Bar - If needed, to reach the oxygen sensor in tight spaces.
4. Torque Wrench - To ensure proper installation torque specifications are met.
5. Pliers - For handling wiring connectors if necessary.
6. Socket Wrench Set - For any other bolts or screws that may need to be removed.
7. Safety Goggles - To protect your eyes during installation.
8. Gloves - To protect your hands and ensure a good grip.
9. Shop Towels/Rags - For cleaning and wiping off any excess debris.

Installation Steps:

1. Prepare the Vehicle:

   • Park the vehicle on a flat surface and ensure it is turned off.
   • Disconnect the negative battery terminal to prevent any electrical shorts.

2. Access the Oxygen Sensor:

   • Locate the existing oxygen sensor. It is usually positioned near the exhaust manifold or underneath the vehicle, depending on the engine layout.
   • If necessary, remove any components blocking access to the oxygen sensor.

3. Remove the Old Oxygen Sensor:

   • Use the oxygen sensor socket attached to an extension bar and ratchet wrench to remove the old sensor. Turn counterclockwise until it is free.
   • Carefully disconnect the wiring harness from the old sensor.

4. Install the New Oxygen Sensor:

   • Take the new Performance Oxygen Sensor and connect it to the wiring harness.
   • Carefully screw the new sensor into the mounting area by hand to avoid cross-threading.
   • Use the ratchet wrench with the oxygen sensor socket to tighten it securely, following the manufacturer’s torque specifications with a torque wrench.

5. Reconnect Everything:

   • If components were removed for access, reinstall them in the reverse order of removal.
   • Reconnect the negative battery terminal.

6. Check for Leaks:

   • Start the vehicle and check for any exhaust leaks around the new sensor. Monitor vehicle performance to ensure everything is functioning optimally.

7. Dispose of Old Parts:

   • Properly dispose of the old oxygen sensor in accordance with local regulations.

Conclusion:

You have successfully installed your new Performance Oxygen Sensor for the RT Roadster Model 12345. This upgrade will enhance your vehicle's fuel efficiency, power performance, and emissions reduction. Enjoy the improved driving experience!