Product Installation Instructions for 4PC 98mm 1.9 Inch Soft Rubber Tires Compatible with 1/10 Scale RC Crawler Vehicles

Tools Needed:

1. Standard Screwdriver - To remove and attach wheel hex screws.
2. Hex Wrench (if applicable) - For adjusting any wheel adapters or hex fittings.
3. RC Vehicle Manual - For specific guidelines related to your vehicle model (optional but recommended).

Installation Steps:

1. Preparation:

   • Ensure your RC vehicle is turned off and placed on a stable surface.
   • Gather all the necessary tools mentioned above.

2. Removing Old Tires:

   • Using the standard screwdriver or hex wrench, carefully unscrew the hex screws holding the old tires in place.
   • Remove the old tires from the wheel rims. Take care not to damage the wheel assembly.

3. Installing New Tires:

   • Align the new 98mm (1.9 inch) soft rubber tires with the wheel rims.
   • Press the tires firmly onto the rims, ensuring they fit securely.
   • Reattach the hex screws, tightening them enough to hold the tires in place without over-tightening.

4. Final Check:

   • Ensure that all screws are tightened properly and that the tires are securely attached.
   • Spin the wheels to check for any obstructions or misalignment.

5. Testing:

   • Turn on the RC vehicle and perform a test run in a safe area to ensure proper performance and stability.

Disclaimer:
Always refer to the vehicle manual for specific instructions tailored to your RC model, especially if modifications or adjustments are required. Enjoy your enhanced off-road experience with your new tires!