Product Installation Instructions for Universal Scooter Motorcycle Rear Mirror Adapters Set

Tools Required:

• 10mm wrench or socket
• 8mm wrench or socket
• 6mm wrench or socket
• Screwdriver (if required for specific mirror types)
• Cloth or rag (to protect surfaces)

Installation Steps:

1. Preparation:

   • Ensure your motorcycle or scooter is parked on a flat surface and the ignition is turned off.
   • Gather all the necessary tools listed above.

2. Select the Right Adapter:

   • Determine which size adapter (M10, M8, or M6) you need based on the mirror hole size on your motorcycle or scooter.
   • Make sure you have the corresponding mirror that matches selected adapter size.

3. Remove Existing Mirrors (if applicable):

   • If you are replacing existing mirrors, use the appropriate wrench or screwdriver to carefully remove them from the handlebar mounts.

4. Install the Adapter:

   • Take the selected adapter and screw it into the handlebar mount with the right threading.
   • Ensure it is tight, but be cautious not to overtighten, which could damage the threads.

5. Attach the Mirror:

   • Once the adapter is securely in place, attach your rearview mirror onto the adapter.
   • Use the appropriate wrench or screwdriver to tighten it securely.

6. Adjust the Mirror:

   • Position the mirror to your desired angle for optimum visibility after installation.
   • Make sure that the mirror is securely held in place before riding.

7. Final Check:

   • Re-check all connections to ensure that everything is tightened appropriately and will remain secure during use.

8. Clean Up:

   • Store your tools safely and use a cloth or rag to clean any surfaces that may have been touched during installation.

Now you are ready to ride safely with your newly installed rearview mirrors! Enjoy your journey!