Product Installation Instructions for Middle Spacer and Bushing Block Compatible with 400cc, 500cc, 600cc, and 800cc ATV UTV Models

Tools Required:

1. Socket Wrench Set
2. Screwdriver Set (Flathead and Phillips)
3. Torque Wrench
4. Pliers
   5.Clean Cloth or Rag
5. Safety Goggles
   7.Gloves

Installation Steps:

1. Preparation:

   • Ensure the ATV/UTV is parked on a flat surface and turned off.
   • Wear safety goggles and gloves to protect yourself during the installation process.

2. Remove Existing Parts:

   • Locate the original middle spacer and bushing block on your vehicle.
   • Use a socket wrench to remove any bolts or screws securing the old components.
   • Carefully detach the old middle spacer and bushing block.

3. Clean the Area:

   • Use a clean cloth to wipe any dirt or debris from the installation area.
   • Ensure that the mounting surfaces are smooth and free from any residue.

4. Install New Middle Spacer and Bushing Block:

   • Position the new middle spacer and bushing block in place.
   • Align them with the mounting holes and ensure they fit securely.

5. Secure Components:

   • Reinsert the bolts or screws removed earlier and tighten them using a socket wrench.
   • Use a torque wrench to ensure that the components are secured to the manufacturer's recommended specifications.

6. Final Checks:

   • Double-check all connections and ensure everything is tightly fastened.
   • Inspect the area for any loose parts or possible issues.

7. Test Drive:

   • Once installation is complete, take the ATV/UTV for a short test drive.
   • Pay attention to the handling and stability to ensure that the installation was successful.

Maintenance Tips:

• Regularly inspect the middle spacer and bushing block for signs of wear or damage.
• Clean the area as needed to maintain optimal performance.

By following these instructions, you can successfully install the middle spacer and bushing block for enhanced vehicle performance and longevity.