Product Installation Instructions for Propeller Cover Replacement Parts (CW CCW for B2C B2W B6 B8 and Bugs 2 Bugs 6)

Compatibility:
These replacement parts are compatible with multiple drone models, including B2C, B2W, B6, B8, Bugs 2, and Bugs 6.

Tools Required:

• No special tools required
• Optional: A clean cloth (for maintenance before installation)
• Optional: Small flat-head screwdriver (if needed for minor adjustments)

Installation Steps:

1. Preparation:

   • Ensure the drone is powered off to prevent accidental activation during installation.
   • Clean the area around the propellers with a clean cloth to remove any dust or debris.

2. Remove Old Propellers:

   • Gently grasp the existing propeller and rotate it counter-clockwise to detach it from the motor shaft.
   • If the propeller is stuck, you may use a small flat-head screwdriver to carefully lift it off.

3. Select Compatible Replacement:

   • Ensure you have the correct CW (clockwise) and CCW (counter-clockwise) propellers suitable for your drone model.

4. Install New Propellers:

   • Align the new propeller with the motor shaft.
   • If installing a CW propeller, turn it clockwise on the shaft until secured.
   • For the CCW propeller, turn it counter-clockwise to attach it properly.

5. Check for Stability:

   • Ensure that the propellers are firmly attached and can’t be easily rotated by hand.

6. Final Inspection:

   • Double-check that all propellers are correctly installed and that there are no signs of damage.

7. Testing:

   • Power on the drone and perform a short test flight to ensure stability and proper functioning with the new propellers.

Note:

• Always replace propellers in pairs (i.e., both CW and CCW) for optimal performance and balance.
• Regularly inspect propellers for wear and tear to maintain safe operation.

By following these steps, you'll efficiently replace your drone's propeller covers, enhancing your flight experience with improved stability and performance.