Product Installation Instructions for Fuel Cap Compatible with Scheppach MP 99-42, T375, T475, T575

Tools Needed:

1. Clean Cloth – For wiping the fuel tank opening.
2. Flathead Screwdriver (optional) – For assisting with the removal of any debris if necessary.
3. Safety Gloves – To protect your hands during installation.

Installation Steps:

1. Preparation:

   • Ensure your engine is off and cool to the touch.
   • Disconnect any power source if applicable.
   • Make sure to have a clean working area to avoid contamination.

2. Remove Old Fuel Cap:

   • If necessary, use a clean cloth to wipe the area around the fuel cap to prevent debris from entering the fuel tank.
   • Gently twist and remove the old fuel cap by turning it counterclockwise.

3. Inspect the Fuel Tank Opening:

   • Check for any dirt or debris in the fuel tank opening.
   • If any residue is present, use the flathead screwdriver carefully (if needed) to remove it.

4. Install the New Fuel Cap:

   • Take the new fuel cap and align it with the fuel tank opening.
   • Press down lightly and twist the cap clockwise until it is securely fastened.

5. Check for Sealing:

   • Ensure that the cap is sealing properly by checking for any visible gaps.
   • A proper seal will prevent fuel evaporation and ensure engine efficiency.

6. Final Check:

   • Make sure the fuel cap is tightly secured.
   • Reconnect any power source if applicable and perform a quick check before use.

Note:
Always refer to your equipment’s manual for any additional safety precautions or guidelines specific to your model.

Enjoy your efficient and safe gardening experience!