Product Installation Instructions for Scooter Air Filter (125cc, 150cc, 200cc Models)

Compatibility:
This air filter is compatible with various models, including Agility, City, Ciak, and People, specifically designed for 125cc, 150cc, and 200cc scooters.

Tools Needed:

• Phillips screwdriver
• Flathead screwdriver
  -Clean cloth or rag
• Checkered gloves (optional)

Installation Steps:

1. Preparation:
   Ensure your scooter is parked on a flat surface and the engine is turned off. Allow the engine to cool if it has been running.

2. Remove the Seat or Cover:
   Use the Phillips screwdriver to remove any screws securing the seat or panel that covers the air filter compartment. Carefully lift it away.

3. Locate the Air Filter:
   Find the air filter housing—it is usually a rectangular or oval box situated near the engine.

4. Take Out the Old Air Filter:
   Gently unclip or unscrew the housing to access the old air filter. Carefully remove it, ensuring not to let any debris fall into the intake.

5. Clean the Housing:
   Wipe the inside of the air filter housing with a clean cloth to remove any accumulated dirt or debris.

6. Install the New Air Filter:
   Take your new air filter and place it into the housing. Ensure it fits snugly and aligns properly with any clips or screws.

7. Reattach the Housing:
   Secure the air filter housing back in place by clipping or screwing it down.

8. Replace the Seat or Cover:
   Reattach the seat or panel, ensuring all screws are tightly secured.

9. Final Check:
   Double-check that everything is securely in place. Start your scooter and listen for any unusual sounds, ensuring proper installation.

Maintenance Tips:

• Regularly check and replace the air filter as needed to maintain engine performance and longevity.
• A clean air filter helps reduce engine wear and provides optimal driving experience.

By following these steps, you can easily replace your scooter's air filter, enhancing performance and extending engine life.