Product Installation Instructions for 3PCS Lot Replacement Accessories

Compatible Models:
BD810, BD850, BD550, BD650, BD520, BD600, BD720

Preparation

Tools Required:

• Phillips screwdriver
• Flathead screwdriver (optional)
• Clean cloth or paper towel
• Safety gloves (optional)

Installation Steps

1. Power Off the Device:
   Ensure that the device is completely powered off and unplugged from any power source to avoid electrical shock.

2. Remove the Old Accessories:

   • Use the Phillips screwdriver to carefully remove any screws securing the old accessories in place.
   • Gently lift the old accessories from their slots. Use a flathead screwdriver if needed to pry them out carefully.

3. Clean the Area:
   Before installing the new accessories, use the clean cloth or paper towel to wipe down the area. This helps ensure a good fit and prevents dust buildup.

4. Install New Accessories:

   • Take the new accessory from the 3PCS set and align it with the slots.
   • Press it firmly into place until you hear a click or feel it fit snugly.

5. Secure the New Accessories:

   • Use the screws you previously removed to secure the new accessories. Tighten them carefully with the Phillips screwdriver without overtightening.
   • Ensure that all parts are secure and properly aligned.

6. Final Check:

   • Inspect the installation to confirm all accessories are correctly fitted and there are no loose parts.
   • If you used safety gloves, remove them and dispose of them properly.

7. Power On the Device:
   Once you’ve completed the installation, plug the device back into the power source and turn it on.

8. Test Functionality:
   Perform a quick functionality test to ensure the device operates smoothly with the new accessories.

Note:
Always refer to your device's user manual for specific instructions related to your model, as procedures may vary slightly between different models. If you encounter any issues during installation, consult a professional for assistance.