Product Installation Instructions for Metal Enhanced Rear Cup Parts for A949 A959 A969 A979 K929 Compatible RC Vehicle Components

Tools Needed:

1. Screwdriver Set

   • A set of screwdrivers (preferably with different head types) to remove and install screws.

2. Hex Wrench

   • A hex wrench (Allen key) that fits the screws on your RC vehicle.

3. Pliers

   • Needle-nose pliers for gripping small components or bending wires.

4. Cutting Tool

   • A small cutting tool (e.g., hobby knife or scissors) for trimming any excess parts or cables.

5. Thread Locking Adhesive (optional)

   • Thread lock to secure screws in place and prevent loosening during use.

Installation Steps:

1. Preparation:

   • Ensure your RC vehicle is powered off and on a stable surface.
   • Gather all the necessary tools listed above.

2. Remove Existing Rear Cup Parts:

   • Use the appropriate screwdriver to remove the screws securing the current rear cup parts.
   • Carefully detach the existing parts from the vehicle.

3. Install the Metal Enhanced Rear Cup Parts:
   -Align the new metal rear cup parts with the mounting holes on your RC vehicle.

   • Use the screwdriver and hex wrench to secure the new components in place.
   • If desired, apply thread locking adhesive to the screws to ensure they stay tight during use.

4. Check for Proper Alignment:

   • Ensure that all parts are correctly aligned and secured before moving on.

5. Test the Functionality:

   • Once installation is complete, perform a test run to ensure that the vehicle operates smoothly with the new rear cup parts.

6. Final Inspection:

   • After testing, double-check all screws and connections to ensure everything is tightly secured.

Enjoy your enhanced RC vehicle performance!