Product Installation Instructions for Replacement Housing for POA-LMP86 and LMP86

Compatibility:

This replacement bulb is specifically designed for the POA-LMP86 and LMP86 models, ensuring perfect compatibility with PLV-Z1X and PLV-Z3 projectors.

Tools Required:

To install the replacement bulb, you will need the following tools:

• Philips screwdriver
• Soft cloth or gloves (to handle the new bulb)
• Service manual (optional, for reference)

Installation Steps:

1. Prepare the Workspace:

   • Make sure you have a clean, well-lit area to work in.
   • Unplug the projector to ensure safety during installation.

2. Remove the Old Bulb:

   • Using the Philips screwdriver, carefully unscrew the bulb cover on your projector.
   • Gently lift the cover and set it aside.
   • Carefully disconnect the old lamp from the projector by releasing the locking mechanism.
   • Handle the old bulb with care to avoid breakage.

3. Install the New Bulb:

   • Take the new POA-LMP86 or LMP86 replacement bulb out of its packaging.
   • Using a soft cloth or gloves, avoid touching the glass part of the bulb.
     -Align the new bulb with the connector inside the projector.
   • Secure the bulb in place by locking it into the proper position.

4. Reattach the Bulb Cover:

   • Place the bulb cover back onto the projector and secure it with the screws using the Philips screwdriver.

5. Power On the Projector:

   • Plug the projector back into the power source.
   • Power on the projector and check to ensure the new bulb is functioning correctly.

Final Notes:

• Dispose of the old bulb properly, as it may contain hazardous materials.
• If you encounter any issues, consult your projector’s service manual or contact customer support for further assistance.

By following these steps, you can efficiently replace the lamp and enjoy a brighter, clearer projection experience. Enjoy your enhanced viewing!