Product Installation Instructions for Fuel Line Hose for 25cc Mini Chainsaw G2500 and 2600

Tools Required:

1. Screwdriver Set: A standard screwdriver or Phillips screwdriver may be needed to remove any screws securing the old fuel line.

2. Utility Knife or Scissors: To cut the new fuel line to the appropriate length if necessary.

3. Pliers: For better grip and to help with the connection of the fuel line, especially if it's tightly secured.

4. Clean Cloth: To wipe any spills or clean the areas around the fuel line.

5. Funnel: Optional but useful if you need to refuel the chainsaw after the installation.

Installation Steps:

1. Safety First: Ensure the chainsaw is turned off and disconnect the spark plug to avoid accidental starts.

2. Remove Old Fuel Line: Use the appropriate screwdriver to remove any screws holding the old fuel line in place. Carefully detach the old line from the oil pump and the fuel tank.

3. Prepare New Fuel Line: If necessary, cut the new fuel line to the required length using a utility knife or scissors.

4. Attach New Fuel Line: Connect one end of the new fuel line to the oil pump. Ensure it fits snugly to prevent leaks.

5. Secure Connections: Use pliers if needed to secure the connections firmly.

6. Reattach to Fuel Tank: Attach the other end of the new fuel line to the fuel tank. Again, ensure a tight fit.

7. Check for Leaks: Before you start the chainsaw, double-check all connections for any visible leaks.

8. Reconnect Spark Plug: Once everything is securely in place and leak-free, reconnect the spark plug.

9. Test the Chainsaw: Start your chainsaw and monitor its performance. Check for consistent fuel flow and ensure it runs smoothly.

Conclusion:

With the simple installation of the Fuel Line Hose, your 25cc Mini Chainsaw G2500 or 2600 will be ready for efficient performance in all your cutting tasks. Enjoy a seamless experience in gardening, forestry, and home maintenance!