Product Installation Instructions for Adjustable Speed ​​Racing Power Jet Refueling Carburetor Screw Kit

Tools Required:

• Phillips screwdriver
• Flathead screwdriver
• Metric socket set
  -Torque wrench
• Adjustable wrench
• Allen wrench set
• Compressed air or carburetor cleaner
  -Clean rags
• Safety goggles

Installation Steps:

1. Preparation:

   • Ensure the motorcycle or vehicle is parked on a flat surface and the engine is cool.
   • Disconnect the battery for safety.

2. Access the Carburetor:

   • Remove any necessary panels or fairings to access the carburetor.
   • Depending on the model, you may need to detach the air filter or intake manifold.

3. Remove the Existing Carburetor Screws:

   • Using the appropriate screwdriver, carefully loosen and remove the existing screws from the carburetor.
   • Keep the screws in a safe place for later reference.

4. Clean the Carburetor:

   • Use compressed air or carburetor cleaner to clean the carburetor inlet and surrounding areas.
   • Wipe down all surfaces with a clean rag to ensure there are no debris or contaminants.

5. Installation of New Screws:

   • Select the new adjustable screws from the kit.
   • Insert the new screws into the carburetor where the old screws were removed.
   • Hand-tighten to avoid cross-threading.

6. Adjust the Screws:

   • Perform preliminary adjustments to the screws for gas mixture optimization as per your engine requirements (refer to the accompanying instruction manual for recommended settings).

7. Reinstall the Carburetor:

   • Attach the carburetor back to the intake manifold, securing it with the torque wrench to the manufacturer’s specifications.
   • Reconnect any removed hoses or wires.

8. Reattach the Air Filter and Panels:

   • Reinstall the air filter and ensure it is securely fastened.
   • Reattach any fairings or panels removed during disassembly.

9. Final Checks:

   • Double-check all connections, screws, and settings to ensure everything is secured and in place.
   • Reconnect the battery.

10. Test the Engine:

    • Start the engine and observe its performance.
    • Make any final adjustments to the carburetor screws as needed for optimal performance.

Safety Precautions:

• Always wear safety goggles when working with chemical cleaners and while performing maintenance.
• Ensure proper ventilation when working with fuel and chemicals.

With these instructions and tools, you should be able to successfully install your Adjustable Speed ​​Racing Power Jet Refueling Carburetor Screw Kit. Enjoy enhanced performance and smooth driving!