Mavic Air 2 Camera Side and Back Cover Cap Set Installation Instructions

Tools Needed:

1. Soft microfiber cloth (for cleaning)
2. No tools are required for installation

Installation Steps:

1. Preparation:

   • Ensure that your Mavic Air 2 drone is powered off and safely placed on a flat surface.
   • Use a soft microfiber cloth to gently clean the camera area, removing any dust or debris.

2. Remove Existing Covers:

   • If there are old camera covers in place, carefully remove them by pulling them away from the camera's sides and back.

3. Install Side Cover:

   • Take the side cover cap from the set.
   • Align it with the corresponding side of the camera.
   • Press it firmly in place until it fits snugly.

4. Install Back Cover:

   • Take the back cover cap from the set.
   • Align it with the back of the camera.
   • Press it firmly until it is securely attached.

5. Install Lens Glass Ring (if applicable):

   • If your set includes a lens glass ring, gently place it over the camera lens.
   • Ensure it fits snugly and does not obstruct the lens.

6. Final Check:

   • Inspect all covers to ensure they are secure and properly aligned.
   • Your Mavic Air 2 camera is now protected and ready for use!

Note:

• The installation process is quick and does not require any tools, making it easy to replace the covers whenever needed.
• Choose your color set according to your style preference for an added personal touch to your device.

Enjoy your enhanced Mavic Air 2 with its new protective covers!