Installation Instructions for 10 Packs Lawn Mower Foam Air Filter

Tools Needed:

1. Screwdriver (if applicable for the model)
   2.Clean cloth or rag
2. Replacement foam air filters (provided in the pack)

Step-by-Step Installation Guide:

1. Safety First:

   • Ensure the lawn mower is turned off and completely cooled down before starting the installation process.

2. Locate the Air Filter:

   • Refer to your lawn mower's user manual to locate the air filter compartment. This is typically near the engine.

3. Remove the Old Air Filter:

   • If your model is secured with screws, use the screwdriver to remove them. Carefully lift the old air filter out of the compartment.
   • If there are any debris or dirt in the compartment, use the clean cloth or rag to wipe it clean.

4. Prepare the New Foam Air Filter:

   • Take one of the new foam air filters from the pack. Ensure it is free from any defects before installation.

5. Install the New Air Filter:

   • Place the new foam air filter into the compartment. Ensure it fits snugly and is properly seated.
   • If screws were removed, reattach them securely to hold the air filter in place.

6. Final Checks:

   • Double-check that everything is secured and that there are no loose parts.
   • Close the air filter compartment if applicable.

7. Maintenance Reminder:

   • Regularly check and replace the air filter, ideally at the beginning of each mowing season, to maintain optimal lawn mower performance.

By following these simple steps, you can ensure that your lawn mower continues to run efficiently and effectively. Enjoy your mowing!