Product Installation Instructions for Air Filters Compatible with BS50-2I, BS60-2I, BS70-2I, and BS60-4S Tamper Rammer

Required Tools:

1. Phillips screwdriver
2. Flathead screwdriver
3. Cleaning cloth or brush (optional)

Installation Steps:

1. Preparation:

   • Make sure the tamper rammer is powered off and disconnected from any power source.
   • Gather all necessary tools and the new air filter pack.

2. Accessing the Filter Compartment:

   • Locate the filter compartment on the tamper rammer. This is often found near the engine or motor housing.
   • Use the Phillips screwdriver to remove any screws securing the cover of the filter compartment.
   • Carefully lift the cover off to expose the old air filter.

3. Removing the Old Filter:

   • Identify the old air filter and carefully pull it out from its housing.
   • If there's dirt or debris in the compartment, use a cleaning cloth or brush to wipe it down for better airflow.

4. Installing the New Filter:

   • Take one of the new air filters from the package. Ensure it is clean and free from any damage.
   • Insert the new filter into the housing, making sure it fits snugly and is oriented correctly (follow any directional arrows if present).

5. Securing the Filter Compartment:

   • Replace the filter compartment cover and secure it with the previously removed screws using the Phillips screwdriver.
   • Ensure everything is tightened properly to avoid any airflow issues.

6. Final Check:

   • Double-check that the filter is securely installed and that the compartment cover is tightly fastened.
   • Reconnect the tamper rammer to the power source and ensure it is ready for operation.

Usage Note:

• Regularly check and replace the air filters to maintain optimal performance and extend the life of your tamper rammer.

Thank you for using our air filters. Enjoy a cleaner, more efficient working environment!