Installation Instructions for Ignition Switch Set Lock for Bws125 Yw125 Yw Series Motorcycles and Scooters

Product Overview:
This ignition switch lock is specifically designed for BWS125, YW125, and YW series motorcycles and scooters. It ensures a long-lasting and reliable usage experience.

Tools Required:

1. Phillips screwdriver
2. Flathead screwdriver
3. Wrench set (for any bolts/nuts)
4. Pliers
5. Wire cutters/stripper (if necessary)
6. Electrical tape (if necessary)
7. Safety goggles (recommended)

Installation Steps:

1. Preparation:

   • Ensure the motorcycle or scooter is parked on a flat surface.
   • Disconnect the battery to prevent any electrical short circuits during installation.

2. Remove the Old Ignition Switch:

   • Use a Phillips screwdriver to remove any screws securing the old ignition switch.
   • Carefully disconnect the wiring harness from the old switch.

3. Install the New Ignition Switch:

   • Take the new ignition switch and connect the wiring harness. Ensure all connections are secure and correctly aligned.
   • If wires need to be cut or stripped, use wire cutters/strippers to prepare them and then secure with electrical tape if necessary.

4. Secure the Ignition Switch:

   • Position the new ignition switch in place and use the Phillips screwdriver to secure it with screws.
   • Double-check that the switch is tightly secured and does not move.

5. Reconnect the Battery:

   • Reconnect the battery terminals, ensuring positive and negative connections are correct.

6. Test the Ignition Switch:

   • Turn the key to the 'on' position and check if all functions (ignition, lighting, locking) are working properly.
   • If functions are not working, revisit connections to ensure everything is properly installed.

7. Final Checks:

   • Once confirmed functional, close any panels that were removed for access during installation.
   • Clean up the workspace and ensure all tools are accounted for.

Safety Note:
Always wear safety goggles to protect your eyes while working on the motorcycle or scooter. Consult a professional if you are unsure about any installation step.

Thank you for choosing our product! Enjoy the enhanced functionality and safety of your motorcycle or scooter.