Installation Instructions for 230W 7R Sharpy Beam Moving Light Bulb Compatible with HRI230W

Tools Required:

1. Screwdriver: A Phillips or flathead screwdriver depending on the fixture's screws.
2. Wrench Set: For securing any nuts or bolts related to the fixture.
3. Cable Ties: To manage cables and ensure a tidy setup.
4. Safety Goggles: To protect your eyes while installing or handling bulbs.
5. Gloves: To handle the bulb safely and avoid skin contact.
6. Multi-Meter (Optional): To check electrical connections and ensure proper voltage.

Installation Steps:

1. Preparation:

   • Ensure the power is turned off to the lighting fixture where the bulb will be installed.
   • Gather all the tools and make sure you have a clean work area.

2. Remove Existing Bulb:

   • Using a screwdriver, carefully detach the cover of the light fixture to access the bulb.
   • Unscrew or unclip the old bulb, if applicable, and remove it from the socket.

3. Install the New Bulb:

   • Carefully unwrap the 230W 7R Sharpy Beam bulb from its packaging, using gloves to avoid touching the glass.
   • Insert the new bulb into the socket securely and follow the manufacturer's instructions for any specific orientation.

4. Reassemble the Fixture:

   • Replace the cover of the fixture, securing it back in place with screws or clips.
   • Ensure all connections are tight and there are no exposed wires.

5. Cable Management:

   • Use cable ties to organize and secure the power and data cables to prevent them from being damaged or tangled.

6. Testing:

   • Restore power to the fixture and test the new bulb. Check for proper operation and make adjustments as needed.

7. Final Checks:

   • Ensure the area around the fixture is free of any obstructions and that the light beam is positioned correctly for optimal performance.

Safety Precautions:

• Always wear safety goggles and gloves when handling bulbs.
• Make sure the fixture is powered off while installing the bulb to avoid electrical hazards.

By following these instructions and using the required tools, you can successfully install your 230W 7R Sharpy Beam bulb and enjoy an enhanced stage lighting experience.