Installation Instructions for Compatible Print Head QY6 8001 8017

Tools Required:

1. Phillips screwdriver
2. Clean, lint-free cloth
3. Latex gloves (optional, to avoid ink smudges)
4. Scissors (if necessary for packaging)

Preparation Steps:

1. Ensure your printer is turned off and unplugged from the power source.
2. Wait a few minutes for the printer components to cool down.
3. Gather all the required tools listed above.

Installation Instructions:

1. Remove the Old Print Head:

   • Open the printer cover carefully.
   • Locate the ink cartridge holder and gently lift it to access the print head.
   • Use the Phillips screwdriver to remove any screws securing the print head (if applicable).
   • Carefully disconnect the old print head from the ink cartridges and gently pull it out from the printer.

2. Prepare the New Print Head:

   • Unbox the new QY6 8001 8017 print head.
   • Examine the print head for any protective caps or seals; remove them before installation.
   • If desired, put on latex gloves to prevent ink smudges on the print head.

3. Install the New Print Head:

   • Align the new print head according to the designated slots in the printer.
   • Insert it carefully, ensuring that it connects properly with the ink cartridges.
   • If there were screws removed, secure the new print head in place by tightening the screws with the Phillips screwdriver.

4. Reassemble the Printer:

   • Close the ink cartridge holder and the printer cover.
   • Plug the printer back into the power source and turn it on.

5. Test the Installation:

   • Run a printer self-test or print a test page to ensure the installation was successful.
   • Check for any errors or misalignments and follow the manufacturer's troubleshooting steps if needed.

Note: If you encounter any issues during installation, please do not hesitate to contact our customer support for professional assistance. We are here to help ensure your printer operates smoothly and efficiently.