Installation Instructions for Air Filter Set Compatible with K TD40, TD48, and KT30 Models

Tools Required:

1. Screwdriver (if required for your specific model)
2. Clean cloth (for dusting and cleaning the area)
3. Vacuum cleaner (optional, for cleaning the air intake area)
4. Replacement Air Filter Set (compatible part numbers: 11003-2085 and 11013-2086)

Installation Steps:

1. Prepare the Work Area
   Ensure you have a clean and well-lit workspace. Make sure to turn off the equipment and disconnect it from any power source to avoid accidents.

2. Remove the Old Air Filter
   Locate the air filter compartment on your equipment. Depending on your model, you may need to use a screwdriver to remove the cover. Gently take out the old air filter. Be cautious to avoid letting any dust or debris fall into the compartment.

3. Clean the Compartment
   Use a clean cloth to wipe down the inside of the air filter compartment. If there’s a significant amount of dust, you may use a vacuum cleaner to clear it out.

4. Insert the New Air Filter
   Take your new air filter from the Air Filter Set. Make sure it is oriented correctly according to any arrows or instructions on the filter. Insert the new filter into the compartment securely.

5. Reattach the Cover
   If your model requires a cover or grille, reattach it securely using a screwdriver if necessary.

6. Check Your Work
   Ensure that everything is in place and there are no loose parts. Make sure the air filter is seated properly.

7. Reconnect the Equipment
   Once everything is securely in place, reconnect the equipment to its power source.

8. Run the Equipment
   Turn on the equipment and confirm it is running smoothly. Listen for any unusual noises that may indicate a problem.

Maintenance Tips:

• Regularly check and clean your air filter to maintain optimal performance.
• Replace the air filter as recommended in your equipment’s user manual or if you notice a decrease in performance.

By following these simple steps, you can ensure your air filter is effectively replaced, helping to improve the performance and lifespan of your equipment.