Gexpress Is a Startup Dedicated to You. Shop With Confidence—Refunds Are Easy Through !
UAVs
model aircraft and RC vehicles
UAV complete aircraft and accessories
Motorcycle and light motorcycle accessories
Gardenoutdoor power equipment and accessories
small generator and general small engine accessories
general generator ignition coil
Printers and office equipment parts
Drones
Auto parts
Lamps and lighting
wide-form and professional printing equipment
US /en/
USD
Hello, Sign In
Account & Lists
Cart
Motorcycle Cylinder Cover Gasket Compatible with 2007-2016 Models Including F650GS F700GS F800GS F800R 2008-2016 F800GT F800S F800ST 2005-2012 Available in Amazon Store
173 Sold
USD 20.00USD20.60
87% Limited Time
About This Item
High-Quality Materials: This motorcycle cylinder head gasket is made of high-temperature-resistant and wear-resistant materials to ensure no leakage for long-term use.
Compatible models: Suitable for multiple models from 2007 to 2016, such as F650GS, F800GS, etc., widely adaptable.
Easy to install: The design complies with the original factory specifications, and users can install it easily without the need for professional tools.
Improve performance: Effectively seal the cylinder to ensure the engine operates at its best and enhance the driving experience.
Economical and affordable: Compared with replacing the entire part, using this gasket to repair can save costs and is cost-effective.
Sold To
United States
USD 5.01
Delivery: 7-15 Business Days
Fast Delivery
Refund If Package Lost
Refund If Items Damaged
Refund If No Delivery in 30 Days
Quantity
1
Installation Instructions
Installation Instructions for Motorcycle Cylinder Cover Gasket
Compatible Models:
- 2007-2016 F650GS
- 2007-2016 F700GS
- 2007-2016 F800GS
- 2007-2016 F800R
- 2008-2016 F800GT
- 2008-2016 F800S
- 2005-2012 F800ST
Materials Needed:
- Motorcycle Cylinder Cover Gasket (included)
- Torque wrench
- Ratchet and socket set (appropriate sizes for your model)
- Screwdriver set (both Phillips and flathead)
- Gasket scraper or plastic putty knife (for removing old gasket remnants)
- Clean rags or shop towels (for cleaning surfaces)
- Engine oil or gasket sealant (if recommended for your model)
Installation Steps:
-
Preparation:
- Ensure the motorcycle is on a stable, level surface.
- Remove the key from the ignition and let the engine cool completely.
-
Remove the Old Gasket:
- Using a gasket scraper or plastic putty knife, carefully remove the old gasket from the cylinder cover and engine surface.
- Clean the surfaces thoroughly with clean rags to remove any debris or leftover gasket material.
-
Install the New Gasket:
- Position the new Motorcycle Cylinder Cover Gasket onto the cylinder head. Ensure it aligns correctly with all holes and grooves.
-
Reattach the Cylinder Cover:
- Place the cylinder cover back onto the engine, ensuring proper alignment with the gasket.
- Hand-tighten all screws/bolts first. Make sure they are not cross-threaded.
-
Torque the Bolts:
- Using a torque wrench, tighten the bolts to the manufacturer's specified torque settings. This varies by model, so refer to your motorcycle's service manual.
-
Final Checks:
- Double-check all connections and ensure everything is secure.
- Clean any spilled oil or gasket material from the surrounding areas.
-
Test Run:
- Start the motorcycle and let it idle. Check for any leaks around the cylinder cover.
- If leaks are present, re-torque the bolts and ensure proper installation.
Conclusion:
By following these steps, you can successfully install the Motorcycle Cylinder Cover Gasket and enhance your bike's performance. Enjoy your ride!
Description
Packing List: As image
Compatible Motorcycle Cylinder Cover Gasket for model range 07-16, including F650GS, F700GS, F800GS, F800R, F800GT, F800S, and F800ST from 05-12.
TAG：
Motorcycle and light motorcycle accessories
Related Items
