Product Installation Instructions for Oil Pump Compatible with Homelite Models UT-10759-A, UT-10771-A, UT-10781-A, UT-10785-A, UT-10815, UT-10842, UT-10870, 23AV, UT-10772-A, and 23AV

Tools Required:

1. Screwdriver Set – Both Phillips and flathead screwdrivers may be needed to remove screws.
2. Pliers – For gripping and twisting components as needed.
3. Wrench Set – To remove any nuts or bolts that may be securing the oil pump.
4. Safety Glasses – To protect your eyes from any debris or liquid during installation.
5. Oil Catch Pan – To catch any excess oil that may leak during the replacement process.
6. Clean Rags – For cleaning up oil spills and wiping down surfaces.
7. Torque Wrench – (optional) Ensures that screws and bolts are tightened to the manufacturer's specifications.
8. Sealant (if necessary) – To ensure a leak-proof seal, check if recommended for your specific model.

Installation Steps:

1. Preparation:

   • Ensure that the device is powered off and disconnected from its power source.
   • Place an oil catch pan underneath to catch any excess oil.

2. Remove the Old Oil Pump:

   • Using the appropriate screwdriver, remove the screws securing the old oil pump.
   • Use pliers or the socket wrench to disconnect any connecting lines from the oil pump.
   • Carefully remove the old oil pump, ensuring that all seals and gaskets come off with it.

3. Install the New Oil Pump:

   • Position the new oil pump in place, aligning it with the screw holes and connecting lines.
   • Secure the pump using the screws and tighten them appropriately, making sure not to overtighten.
   • Reattach any lines connected to the oil pump.

4. Check for Leaks:

   • Reconnect the power and start the device to check if the oil pump is functioning correctly.
   • Monitor for any leaks around the new installation.

5. Cleanup:

   • Dispose of any excess oil properly and clean the workspace using clean rags.

6. Final Inspection:

   • Ensure all components are secured and functioning smoothly before regular operation.

Note:
Always refer to your specific device’s manual for additional details and safety instructions. Ensure that all safety precautions are taken while performing the installation.

By following these steps, you can efficiently install the oil pump and enhance the performance of your outdoor power equipment.