Product Installation Instructions for RC Car Gear Set

Introduction:
Thank you for purchasing the RC Car Gear Set compatible with 1/10 Scale Crawler Models. This installation guide will help you to install the 56 Teeth Spur Gear and 13 Teeth Motor Pinion easily and effectively.

Tools Required:
To successfully install the gear set, you will need the following tools:

• A small Phillips screwdriver
• A small flathead screwdriver
• A wrench (if necessary for your specific model)
• A pair of pliers (optional, for grip)
• Loctite (optional, for securing screws)

Installation Steps:

1. Preparation:

   • Ensure your work area is clean and free of debris.
   • Gather all required tools listed above.

2. Remove the Existing Gear:

   • Power down your RC car and disconnect the battery.
   • Use the small Phillips screwdriver to remove any screws securing the existing motor and gear assembly.
   • Carefully detach the motor from the chassis, track keeping of all screws and hardware.

3. Install the Motor Pinion:

   • Take the new 13 Teeth Motor Pinion from the gear set.
   • Align it with the motor shaft and push it onto the shaft until it is snug.
   • Secure the pinion using the provided screw. If desired, apply a small amount of Loctite for extra security.

4. Install the Spur Gear:

   • Next, take the 56 Teeth Spur Gear.
   • Connect it to the drive shaft or the gear assembly, ensuring it is properly aligned with the pinion gear.
   • Secure it in place with the appropriate screws. Ensure it is tight to avoid any slippage.

5. Reattach the Motor:

   • Position the motor back onto the chassis, aligning it with the spur gear.
   • Use the Phillips screwdriver to reinsert screws and secure the motor.

6. Final Adjustments:

   • Check the alignment between the pinion and spur gear to ensure they mesh smoothly.
   • Make any necessary adjustments by slightly repositioning the motor before tightening all screws completely.

7. Power Up:

   • Once everything is securely in place, reconnect the battery and power up the RC car.
   • Test the movement to ensure smooth operation of the gears.

Conclusion:
With the installation of your new gear set complete, you are now ready to enjoy enhanced driving performance. Always refer back to this guide for maintenance tips and installation reminders. Happy crawling!