Installation Instructions for Fuel Tank Assembly for 169CC 6.0HP 4 Stroke Engine

Tools Required:

1. Adjustable Wrench - for loosening and tightening any bolts.
2. Screwdriver Set - flathead and Phillips, for removing and securing screws.
3. Pliers - for gripping and holding components securely.
4. Fuel Line Clamp - to prevent fuel spillage during installation.
5. Rag or Cloth - for cleaning any spills and ensuring a clean workspace.
6. Safety Gloves - to protect your hands while working with fuel components.
7. Safety Glasses - to protect your eyes from potential fuel splashes.

Installation Steps:

1. Preparation: Ensure the engine is turned off and cool. Disconnect the spark plug to prevent accidental starts.

2. Remove Old Fuel Tank:

   • Use a screwdriver to remove any screws securing the old fuel tank.
   • If applicable, use pliers to disconnect the fuel line carefully, utilizing a fuel line clamp to minimize spillage.

3. Install New Fuel Tank Assembly:

   • Position the new fuel tank assembly in place.
   • Connect the fuel line to the new tank, ensuring a secure fit.
   • Reinsert and tighten screws with the screwdriver.

4. Attach Fuel Cap and Filter:

   • Make sure the fuel filter is properly installed within the tank.
   • Secure the fuel cap tightly to ensure no leaks occur.

5. Final Check:

   • Inspect all connections and fittings to ensure everything is secure.
   • Remove any tools and rag used during the installation.

6. Reconnect Spark Plug: Once you are satisfied with the installation, reconnect the spark plug.

7. Test the Engine: Start the engine and check for any leaks around the fuel tank assembly. Ensure the engine runs smoothly.

Safety Note:

Always follow safety procedures when working with fuel and engine components. Dispose of any old fuel and parts according to local regulations.

Enjoy the enhanced performance and longevity of your 169CC 6.0HP 4 Stroke Engine!