Installation Instructions for Compatible With 1/10 RC Off-Road Vehicle Soft Rubber 2.2 Inch Bully Wheel Tires Set of 4

Tools Needed:

1. Screwdriver Set (Phillips and flathead)
2. Hex Wrench Set (appropriate size for your RC vehicle)
3. Pliers (for tire bead seating, if necessary)
4. Tire Glue (optional, for added security)
5. Ruler or Caliper (to measure wheel dimensions, if needed)

Installation Steps:

1. Preparation:

   • Ensure your workspace is clean and free of debris.
   • Gather all necessary tools listed above before starting the installation.

2. Remove Old Tires:

   • Use the appropriate screwdriver or hex wrench to remove the wheels from the RC vehicle.
   • Carefully detach the old tires from the wheels, ensuring not to damage the wheel rims.

3. Inspect New Tires:

   • Before installation, inspect the new Bully Wheel Tires for any damages or imperfections.

4. Install New Tires:

   • Align the new soft rubber tires with the wheel rims.
   • Push the tire onto the rim, ensuring that the bead of the tire fits snugly into the rim groove.
   • If needed, use pliers to help seat the tire bead securely.

5. Attach Wheels to Vehicle:

   • Once all tires are securely mounted on the rims, reattach the wheels to your RC vehicle.
   • Use a screwdriver or hex wrench to tighten the screws or nuts securely.

6. Optional Tire Glue:

   • For added security, apply a small bead of tire glue along the tire bead to prevent any slippage during use.

7. Final Check:

   • Ensure all wheels are securely attached and properly aligned.
   • Perform a quick test spin on the wheels to ensure they spin freely without any obstruction.

8. Test the Vehicle:

   • Take your RC vehicle to an open space and test it out on various terrains to experience the superior grip and performance of your new Bully Wheel Tires.

Enjoy your enhanced off-road adventures with your newly installed tires!