Product Installation Instructions for Compatible Primer Bulb

Compatible Models:
PPB300E, PPB32SST, PPB350, SM132, SM132LE, PP3516AVX, PP4218AVX, PP338PT, PP335, PP5020AV, PP446T, PP133

Installation Requirements:

Tools Needed:

1. Screwdriver Set: Depending on the model, you may need a Philips or flathead screwdriver.
2. Pliers: For removing any clips or securing hoses if necessary.
3. Clean Cloth: To wipe down any fuel spills or debris in the work area.
4. Safety Goggles: To protect your eyes while working with fuel systems.

Installation Steps:

1. Preparation:
   Ensure that the equipment is powered off and disconnected from any fuel source to avoid accidents.

2. Remove the Old Primer Bulb:

   • Use the appropriate screwdriver to remove any screws holding the old primer bulb in place.
   • Carefully detach any hoses connected to the old bulb using pliers if needed.

3. Clean the Area:
   Wipe down the area around the primer bulb and hose connections with a clean cloth to remove fuel residue and debris.

4. Install the New Primer Bulb:
   -Align the new primer bulb with the existing mounting area.

   • Secure it in place, ensuring that any hoses are properly attached and tight.

5. Final Checks:

   • Double-check that all connections are secure.
   • Ensure there are no fuel leaks in the area.

6. Test the Installation:

   • Reconnect the fuel source and power on the equipment.
   • Press the primer bulb to ensure it operates smoothly without any issues.

###Conclusion

Following these instructions will help you install the compatible primer bulb efficiently. Enjoy the enhanced performance and durability of your equipment with the new part! If you experience any issues during installation, please consult the manufacturer’s manual for additional guidance.