Product Installation Instructions for Fuel Valve Cock with Tube

Compatibility:

• This fuel valve is compatible with various digital inverter generator models, including IG770, IG1000, IG2000, and IG2600.

Installation Requirements:

Before starting the installation, please make sure you have the following tools and materials ready:

Tools Needed:

1. Screwdriver (Flathead or Phillips, depending on your generator model)
2. Pliers (to hold and adjust fuel lines)
3. Wrench (if needed for securing fittings)
4. Rags or Paper Towels (to clean up any fuel spills)
5. Safety Glasses (for eye protection)
6. Funnel (optional, for refueling if needed post-installation)

Installation Steps:

1. Safety First:

   • Ensure the generator is turned off and cool to the touch.
   • Disconnect the spark plug to prevent accidental starting.

2. Drain Fuel:

   • If there is fuel in the generator, use the rags or paper towels to soak up any spills and drain the fuel tank, if necessary.

3. Remove Old Fuel Valve:

   • Locate the existing fuel valve on the generator.
   • Use the appropriate screwdriver or wrench to carefully disconnect the old fuel valve and any attached tubes.

4. Install New Fuel Valve:

   • Position the new fuel valve in place.
   • Secure it by hand-tightening screws or fittings as required, ensuring a snug fit.

5. Connect Fuel Line:

   • Attach the fuel line to the new valve, ensuring it is securely connected to prevent leaks.

6. Check for Leaks:

   • Once everything is connected, turn the fuel supply back on and check for any leaks around the connections.

7. Reattach Spark Plug:

   • Once you're sure there are no leaks, reattach the spark plug to its original position.

8. Test Run:

   • Start the generator to ensure that the new fuel valve is functioning properly.

Conclusion:

By following these installation instructions, you can successfully replace the fuel valve and maintain your generator's performance. Enjoy a reliable and safe operation!

If you encounter any problems during installation, please consult the generator's manual or seek assistance from a professional.