Product Installation Instructions for Compatible Motorcycle Oil Filter

Compatibility:
This oil filter is designed for use with the following motorcycle models: CF700-2, 400NK, 650NK, 400GT, 650GT, 650TR, 650MT, and more.

Tools Required:
Before you begin the installation process, make sure you have the following tools on hand:

1. Socket Wrench Set:
   To loosen and tighten bolts or nuts.

2. Oil Filter Wrench:
   To help remove the old oil filter easily.

3. Funnel:
   To avoid spills when pouring new oil into the engine.

4. Drain Pan:
   To collect the old oil during the oil change process.

5. Rags or Paper Towels:
   For cleaning any spills and wiping hands.

6. Torque Wrench:
   To ensure that the bolts are tightened to the recommended specifications.

7. Replacement Oil:
   Ensure you have the correct type and amount of oil for your motorcycle model.

Installation Steps:

1. Prepare Your Motorcycle:
   Park your motorcycle on a level surface and allow the engine to cool.

2. Drain the Old Oil:
   Place a drain pan under the oil pan, remove the oil drain plug using a socket wrench, and let the old oil fully drain out.

3. Remove the Old Oil Filter:
   Use the oil filter wrench to unscrew the old oil filter. Be careful as some old oil may still be in the filter.

4. Prepare the New Oil Filter:
   Before installing the new oil filter, apply a small amount of new oil to the rubber gasket on the top of the filter. This helps ensure a proper seal.

5. Install the New Oil Filter:
   Screw on the new filter by hand until it’s snug. Avoid over-tightening.

6. Reinstall the Drain Plug:
   Reinstall the oil drain plug and tighten it using a torque wrench to the manufacturer's specifications.

7. Add New Oil:
   Use a funnel to pour new oil into the engine, checking the owner's manual for the correct amount and type.

8. Check for Leaks:
   Start the engine and let it run for a few minutes. Check around the oil filter and drain plug for any signs of leakage.

9. Dispose of Old Oil and Filter:
   Properly dispose of the old oil and filter at a recycling center or a service that handles hazardous waste.

By following these instructions, you will ensure that your motorcycle is equipped with a new oil filter, contributing to better engine performance and longevity. Enjoy your ride!