Installation Instructions for Universal Motorcycle Carburetor Intake Adjuster Interface Adapter

Congratulations on your purchase of the Universal Motorcycle Carburetor Intake Adjuster Interface Adapter, compatible with various models including GS125, GN125EN, and CG125. Please follow the instructions below for a successful installation.

Tools Required:

1. Screwdriver Set - A Phillips and flathead screwdriver will be needed to remove and secure screws.
2. Wrench Set - Adjustable wrenches or socket wrenches to loosen or tighten fittings.
3. Pliers - For gripping and holding small components if necessary.
4. Rubber Mallet (optional) - To tap components without damaging them.
5. Cleaning Cloth - To clean any dirt or debris from connection points.
6. Engine Cleaner (optional) - To clean the carburetor or intake system if needed.
7. Safety Glasses - To protect your eyes during installation.
8. Gloves - To keep your hands clean and protected.

Installation Steps:

1. Preparation:

   • Ensure the motorcycle is parked on a stable and flat surface.
   • Disconnect the battery to prevent any electrical issues while working.

2. Remove Existing Carburetor Components:

   • Using the screwdriver and wrench, carefully disconnect the existing intake tubing or carburetor top.
   • Keep track of any screws or clips removed during this process.

3. Clean the Connection Points:

   • Use the cleaning cloth and engine cleaner to remove any dirt or residue from the carburetor and intake. Ensure a clean surface for optimal performance.

4. Install the Adapter:

   • Align the Universal Carburetor Intake Adjuster Adapter with the existing intake system.
   • Gently push the adapter into place. If it does not fit easily, double-check the alignment before applying force.

5. Secure the Adapter:

   • Use the screwdriver and wrench to secure the adapter in place with the previously removed screws or clips.
   • Ensure all connections are tight to avoid air leaks.

6. Reconnect Components:

   • Reattach any previously disconnected components, ensuring everything is secure.

7. Reattach the Battery:

   • Once everything is installed correctly, reconnect the battery.

8. Testing:

   • Start your motorcycle and allow it to idle for a few minutes.
   • Check for any unusual noises or leaks.
   • Take the bike for a short test ride to ensure everything is functioning smoothly.

Safety Precautions:

• Always wear safety glasses and gloves.
• Work in a well-ventilated area to avoid inhaling fumes.
• Ensure the motorcycle is securely supported to prevent accidents.

If you encounter any issues during the installation process, please seek assistance from a professional mechanic. Enjoy enhanced performance with your new Universal Motorcycle Carburetor Intake Adjuster Adapter!