Product Installation Instructions for 2Pairs 5045 5-Inch 3-Blade Propellers

Tools Required:

1. Screwdriver: A small Phillips or flathead screwdriver, depending on your drone's mounting hardware.
2. Propeller Locking Nuts: Ensure you have the appropriate locking nuts if your drone model requires them.
3. Anti-static Wrist Strap (optional): To prevent static electricity from damaging electronic components.
4. Measuring Tape (optional): For measuring propeller dimensions and ensuring compatibility.

Installation Steps:

1. Preparation:

   • Ensure the drone is powered off and the batteries are removed.
   • Gather all the required tools and propellers.

2. Remove Old Propellers:

   • Carefully unscrew the existing propellers using the screwdriver.
   • Make sure to keep the screws and nuts safe for reuse if necessary.

3. Check Compatibility:

   • Inspect the new 5045 propellers to confirm they are the correct size and design for your drone model.

4. Install New Propellers:

   • Align the new propeller blades with the motor shaft, ensuring they are facing the correct direction for propulsion.
   • If required, use the original screws and nuts to secure the propellers firmly in place.
   • Tighten them with the screwdriver, but be cautious not to overtighten to avoid damaging the propeller or the motor shaft.

5. Final Check:

   • Ensure all propellers are securely attached and there are no loose parts.
   • Examine your installation for any signs of damage or misalignment.

6. Power On:

   • Reinstall the battery and power on the drone.
   • Conduct a short test flight to verify the propellers are functioning correctly and delivering optimal performance.

Note: Always follow the manufacturer’s recommendations and specifications for safe installation and use of props, and perform regular maintenance checks to ensure continued performance and safety.