Product Installation Instructions for Steering Wheel Hub Adapter Kit for Jeep SJ 413 Compatible with Samurai SU-2

Tools Needed:

1. Socket Wrench Set - To remove and install the bolts securing the steering wheel.

2. Torx Screwdriver - Required for any Torx screws that may be present on the wheel or adapter.

3. Flathead Screwdriver - Useful for gently prying off decorative covers or trims if needed.

4. Phillips Screwdriver - To assist in removing any screws holding components in place.

5. Pliers - For gripping or bending small components as necessary.

6. Steering Wheel Puller Tool (optional but recommended) - To help remove the original steering wheel if it is tightly fitted.

7. Torque Wrench - To ensure that bolts are tightened to the manufacturer's specifications after installation.

Installation Steps:

1. Prepare the Vehicle: Make sure your vehicle is parked on a level surface and the ignition is turned off. Disconnect the battery for safety.

2. Remove the Original Steering Wheel:

   • Using the socket wrench, remove the nut securing the steering wheel.
   • If necessary, use the steering wheel puller tool to gently detach the wheel from the column.

3. Install the Hub Adapter:
   -Align the hub adapter with the steering column.

   • Secure the hub adapter in place using the available bolts. Use the torque wrench to tighten according to specifications.

4. Attach the New Steering Wheel:
   -Align the new steering wheel with the hub adapter and secure it with the provided nut.

   • Ensure it’s properly tightened using the torque wrench.

5. Reconnect Battery and Test:

   • Reconnect the battery, turn on the vehicle, and test the new steering wheel for proper functionality and comfort.

6. Final Adjustments:

   • Make any necessary adjustments to ensure everything feels right during driving.

By following these instructions, you can easily install the Steering Wheel Hub Adapter Kit and enhance your driving experience. Enjoy your ride!