Product Installation Instructions for Ignition Coil Compatible with EH65 EH72 RN Engines

Compatible Models:
EF12000E, EF13000TE, RGV12100, RGV13100
Part Numbers:
263-78202-11, 263-78202-21

Tools Required:

1. Socket Set: A set of sockets (including ratchet and extensions) to remove engine cover and ignition coil bolts.
2. Screwdriver Set: Both flathead and Phillips screwdrivers for any clips or covers that need to be removed.
3. Pliers: To help disconnect any electrical connectors securely.
4. Torque Wrench: For properly tightening bolts to the manufacturer’s specifications during reinstallation.
5. Cleaning Supplies: Rags and engine cleaner to clean areas around the ignition coil and ensure a clean installation.
6. Safety Gear: Safety glasses and gloves to protect against debris and electrical hazards.

Installation Steps:

1. Preparation: Ensure the engine is turned off and cool. Disconnect the battery to prevent electrical shock.

2. Access the Ignition Coil: Remove any covers or components obstructing access to the ignition coil using the appropriate tools from your socket set and screwdriver set.

3. Remove the Old Ignition Coil: Disconnect any wiring harnesses. Unscrew the bolts holding the old ignition coil in place and gently remove it.

4. Clean the Area: Use rags and engine cleaner to clean the mounting area, ensuring a secure fit for the new ignition coil.

5. Install the New Ignition Coil: Position the new ignition coil (ensure that the compatible part numbers match) in the mounting area. Secure it with bolts and tighten with a torque wrench to the specified settings.

6. Reconnect Wiring: Attach all electrical connectors to the new ignition coil, ensuring they are securely in place.

7. Reassemble Components: Put back any covers or components that were removed to access the ignition coil.

8. Reconnect the Battery: Once everything is secured and reassembled, reconnect the battery.

9. Test the Installation: Start the engine to ensure proper installation and operation of the new ignition coil. Monitor for any unusual sounds or issues during startup.

Note: This product is designed for specific engine models. Always refer to your engine manual for specific instructions and torque specifications. If uncertain about any procedure, consult a professional mechanic.