Installation Instructions for Compatible Oil Filter for 4X4 400, 455, 499, 500 EFI Ranger 500 Crew LE 2013 Turbo Silver LE

Required Tools:

• Oil Filter Wrench: To easily remove the old oil filter.
• Socket Wrench Set: For loosening and tightening the oil drain plug.
• Drain Pan: To collect old oil during the oil change process.
• Rags or Paper Towels: For clean-up and to wipe any spills.
• New Oil Filter: Ensure you have the compatible oil filter ready for installation.
• Engine Oil: Make sure to have the appropriate quantity and type of engine oil for your vehicle.

Installation Steps:

1. Prepare Your Vehicle:

   • Park your vehicle on a level surface and turn off the engine. Allow it to cool if it has been running.

2. Gather Your Tools:

   • Have all the required tools and new oil filter within reach.

3. Drain Old Oil:

   • Place the drain pan under the oil drain plug.
   • Using the socket wrench, remove the drain plug and allow the old oil to fully drain into the pan.

4. Remove Old Oil Filter:

   • Use the oil filter wrench to loosen and remove the old oil filter. Be careful as some oil may spill out.

5. Prepare New Oil Filter:

   • Take your new oil filter and apply a small amount of engine oil to the rubber gasket on the top of the filter. This helps ensure a good seal.

6. Install New Oil Filter:

   • Install the new oil filter by hand. Do not overtighten—just ensure it's snug.

7. Replace Drain Plug:

   • Once the oil has fully drained, replace and tighten the drain plug securely.

8. Add New Oil:

   • Using a funnel, add the new engine oil through the oil fill cap. Refer to your vehicle's manual for the correct amount and type of oil.

9. Start Engine:

   • Start the engine and let it run for a few minutes. Check for any leaks around the new oil filter and drain plug.

10. Dispose of Old Oil and Filter:

    • Properly dispose of your old oil and filter at a recycling center or an auto parts store that offers disposal services.

Conclusion:

Following these steps will ensure a successful installation of your new oil filter, enhancing your vehicle's performance while saving you valuable time and money on maintenance. Remember to check your oil levels regularly and change your oil filter as recommended in your vehicle's manual.