Installation Instructions for Fuel Tank Assembly Compatible with Neuson WM80 and BS Series Rammer Tamper

Tools Required:

1. Phillips Screwdriver
2. Flathead Screwdriver
3. Wrench Set (Metric)
4. Pliers
5. Fuel Line Hose Clamp Tool (if needed)
6. Clean Rag
7. Safety Gloves
8. Safety Goggles

Installation Steps:

1. Preparation:

   • Ensure the work area is clean and free of debris.
   • Gather all tools and materials required for installation.
   • Wear safety gloves and goggles to protect yourself during the installation process.

2. Remove the Old Fuel Tank:

   • Locate the existing fuel tank on your machine.
   • Using a wrench, disconnect the fuel lines carefully to prevent spillage.
   • Remove any screws or bolts securing the fuel tank in place using the Phillips screwdriver or wrench.
   • Gently lift the old fuel tank out of its position and dispose of it according to local regulations.

3. Install the New Fuel Tank:

   • Position the new fuel tank assembly in the designated area.
   • Secure the fuel tank in place using screws or bolts that were removed earlier. Ensure all connections are tight to avoid leaks.
   • If your fuel tank comes with a fuel valve tap, install it according to the manufacturer's instructions.

4. Connect the Fuel Lines:

   • Reconnect the fuel lines to the new fuel tank. Ensure each connection is secure; you may use fuel line hose clamps for added security.
   • Double-check all connections for proper alignment and tightness.

5. Final Checks:

   • Inspect the installation area to ensure there are no loose parts or tools left behind.
   • Before starting the machine, wipe away any spilled fuel or debris with a clean rag.

6. Testing:

   • Start your Neuson WM80 or BS Series to ensure proper functionality of the new fuel tank.
   • Monitor for any leaks or issues during initial operation.

7. Maintenance:

   • Regularly check the fuel tank and connections for signs of wear or leaks to ensure optimal performance.

By following these steps, you can efficiently install the Fuel Tank Assembly and ensure your equipment operates at peak performance. Enjoy your newly installed component!