Installation Instructions for Compatible Primer Bulb

Compatible Models: UT-10870, UT-26204, UT-26205, UT-10941, B2216CC, UT-10880, D3300, UT-10857 D3300C, UT-10882 D3300C

Required Tools:

1. Screwdriver Set (Philips and Flathead)
2. Pliers
3. Socket Wrench Set
4. Fuel Line Clamps (if applicable)
5. Clean Cloth or Rag
6. Safety Goggles
7. Gloves

Installation Steps:

1. Safety First:

   • Ensure that the equipment is turned off and cool before starting the installation.
   • Wear safety goggles and gloves to protect yourself.

2. Access the Old Primer Bulb:

   • Use the screwdriver to remove any screws or fasteners that hold the casing or cover in place.
   • Carefully lift off the casing to access the old primer bulb.

3. Remove the Old Primer Bulb:

   • If there are any fuel lines connected to the old primer bulb, use pliers to carefully disconnect them.
   • Remove the old primer bulb by unscrewing or unclipping it from its housing.

4. Prepare for the New Primer Bulb:

   • Clean the area around the primer bulb housing with a clean cloth or rag to prevent dirt or debris from entering the fuel system.

5. Install the New Primer Bulb:

   • Position the new primer bulb into the housing, ensuring it is aligned correctly.
   • Reconnect any fuel lines securely to the new bulb.
   • If necessary, use fuel line clamps to ensure a tight fit.

6. Reassemble the Equipment:

   • Replace the casing or cover.
   • Use the screwdriver to reattach any screws or fasteners securely.

7. Testing:

   • Before using the equipment, make sure all connections are tight and there are no fuel leaks.
   • Start the engine and test the new primer bulb to ensure it operates smoothly.

Final Notes:

• Storing tools in a designated area will help keep your workspace organized.
• Properly dispose of the old primer bulb and any waste materials according to local regulations.

Enjoy the improved efficiency and performance of your equipment with the new compatible primer bulb!