Installation Instructions for Ignition Coil for 2-Stroke Chainsaws

Compatibility:
This ignition coil is compatible with various 2-stroke chainsaw models including MS271, MS291, MS271C, and MS291C, catering to different user needs.

Tools Required:
Before starting the installation process, please ensure you have the following tools ready:

1. Screwdriver Set (including both flathead and Phillips)
2. Socket Wrench Set
3. Torque Wrench
4. Pliers
5. Wire Cutters/Strippers
6. Gloves (to protect your hands)
7. Safety Goggles (for eye protection)

Installation Steps:

1. Safety First:

   • Ensure the chainsaw is turned off and disconnected from any power source.
   • Wear gloves and safety goggles for protection.

2. Remove the Chainsaw Cover:

   • Using the screwdriver or socket wrench, remove the screws or bolts holding the chainsaw cover in place. Keep these screws secure for reinstallation.

3. Locate the Ignition Coil:

   • Find the existing ignition coil which is usually located near the engine.

4. Disconnect Wires:

   • Carefully disconnect the wires attached to the old ignition coil. Use pliers if necessary, and note the position of each wire for reconnection.

5. Remove the Old Ignition Coil:

   • Unscrew the screws or bolts securing the old ignition coil using the appropriate screwdriver or socket wrench.

6. Install the New Ignition Coil:

   • Position the new ignition coil in the same location as the old one. Ensure it fits securely into place.
   • Reattach the screws or bolts to fasten the new coil. Use the torque wrench to tighten them to the specified torque.

7. Reconnect Wires:

   • Follow your notes from step 4 to reconnect the wires to the new ignition coil, ensuring a solid connection.

8. Reinstall the Chainsaw Cover:

   • Place the chainsaw cover back on and secure it with the screws or bolts that you previously removed.

9. Final Check:

   • Inspect all connections to ensure they are secure and that nothing is loose.

10. Test the Chainsaw:

    • Reconnect to any power source and start the chainsaw to ensure that it is functioning properly.

Conclusion:
With this ignition coil, you can enjoy improved performance and efficiency in your chainsaw operation. The installation process is user-friendly and does not require professional tools, saving both time and money on repairs.