Product Installation Instructions for 2pc Motorcycle Bearing Rocker Arm Compatible with 125cc Engines (Model 14431-383-000)

Before You Begin:

Please read through the installation instructions carefully. Ensure you have all necessary tools and equipment ready before starting the installation process.

Tools Required:

1. Socket Wrench Set
2. Torque Wrench
3. Screwdriver Set (Flathead and Phillips)
4. Pliers
   5.Clean Cloth or Rag
5. Oil or Lubricant (for bearings)
6. Safety Goggles
   8.Gloves

Installation Steps:

1. Preparation:

   • Ensure the motorcycle is parked on a stable, flat surface.
   • Use the clean cloth to wipe any dirt or debris from the working area.

2. Remove the Engine Cover:

   • Using the screwdriver or socket wrench, carefully remove any screws or bolts securing the engine cover.
   • Gently lift off the cover and set it aside.

3. Remove Existing Rocker Arm:

   • Locate the existing rocker arm within the engine assembly.
   • Use the socket wrench to remove the bolts that secure the old rocker arm in place.
   • Carefully take out the old rocker arm and inspect the area for any debris.

4. Install New Bearing Rocker Arm:

   • Take the new 2pc Motorcycle Bearing Rocker Arm and apply a small amount of oil or lubricant to the bearings.
   • Position the new rocker arm in its designated spot.
   • Use the socket wrench to secure it in place with the bolts removed earlier.
   • Ensure all bolts are tightened to the manufacturer’s specifications using the torque wrench.

5. Reassemble the Engine Cover:

   • Carefully place the engine cover back onto the engine.
   • Secure it by tightening all screws or bolts with a screwdriver or socket wrench.

6. Final Check:

   • Inspect your work to ensure everything is properly secured.
   • Start the motorcycle and allow it to idle; listen for any unusual sounds to confirm proper installation.

Conclusion:

By following these installation steps, you will enhance the performance and efficiency of your 125cc motorcycle engine while saving on maintenance costs with the new bearing rocker arm. Always remember to maintain safety precautions while working on your motorcycle. Enjoy the improved ride!