Product Installation Instructions for 2/4 Pcs 2.2 Inch Rubber Tires Wheels

Compatible with 1/10 Rock Buggy RC Crawler Vehicle Axial 90046

What You Will Need:

• Tools Required:
  • Phillips screwdriver
  • Flathead screwdriver (optional)
  • Clean cloth or paper towel (for cleaning)
  • Optional: Tire glue (if required for your specific model)

Installation Steps:

1. Preparation:

   • Ensure that the vehicle is turned off and placed on a flat surface.
   • Use a clean cloth to wipe the wheel hubs and ensure a clean working area.

2. Removing Old Tires:

   • Use the Phillips screwdriver to remove any screws holding the existing tires in place, if applicable.
   • If the tires are glued, carefully pry them off using the flathead screwdriver to avoid damaging the wheel hubs.

3. Inspecting the New Tires:

   • Before installation, check each new tire for any defects.
   • Ensure that the rubber tires are free of debris.

4. Installing New Tires:

   • Align each new tire with the wheel hub.
   • Press the tire firmly onto the hub to ensure a secure fit.
   • If using tire glue, apply a small amount to the rim before fitting the tire for added security. Allow glue to dry as per the manufacturer's instructions.

5. Reattach the Wheel:

   • If applicable, secure the tire by replacing and tightening the screws with the Phillips screwdriver.
   • Ensure all screws are tightly fastened but do not overtighten to avoid stripping the screws.

6. Final Inspection:

   • Rotate each tire to ensure smooth movement.
   • Check for any wobbling or uneven fit.

7. Testing:

   • Turn on the RC vehicle and conduct a short test run to ensure the new tires function properly on various terrains.

Enjoy enhanced performance and traction with your new tires on your RC vehicle!