Product Installation Instructions for Steering Cup Set and Swing Arm Replacement Parts

Compatible Models: 144001, 144002, 124016, 124017, 124018, 124019 RC Cars

Preparation:

Before beginning the installation, ensure you have the following tools ready:

1. Screwdriver Set - A set of Phillips and flathead screwdrivers for removing screws.
2. Hex Wrench Set - For loosening and tightening the hex screws on your RC car.
3. Pliers - To help grip and manipulate small components as needed.
4. Tweezers - Useful for handling small parts during installation.
5. Small Work Surface - A clean, flat surface to work on, preventing loss of small parts.
6. Lubricant (optional) - For ensuring smooth movement of moving parts after installation.

Installation Steps:

1. Preparation:

   • Turn off the RC car and remove the battery to prevent any accidental startup.
   • Place the car on your work surface for easy access.

2. Remove the Old Parts:

   • Using your screwdriver or hex wrench, carefully unscrew the existing steering cup and swing arm assembly.
   • Make sure to keep all screws and original components in a safe place for potential reuse.

3. Install New Parts:

   • Take the new steering cup and swing arm from the replacement set.
     -Align them with the designated areas on your RC car.
   • Securely fasten the components using the screws from the original assembly or the provided screws (if included).

4. Check Functionality:

   • After installation, manually test the steering mechanism and swing arm to ensure smooth operation.
   • Make any necessary adjustments to tighten or align the parts properly.

5. Final Assembly:

   • Once everything is in place and functioning well, reassemble any remaining parts of the RC car that were removed.
   • Reinsert the battery and power on the RC car to perform a final test drive.

Note:

• Ensure all screws are tightened adequately but avoid over-tightening to prevent damages to the components.
• If needed, apply a small amount of lubricant to moving parts for better performance.

Enjoy improved handling and stability with your newly installed steering cup set and swing arms!