Installation Instructions for Windshield Wiper Blade Set for 1994-2000 Model 145

Tools Required:

1. Flathead screwdriver
2. Phillips screwdriver (if needed)
3. Cloth for cleaning (optional)

Installation Steps:

1. Preparation:

   • Park your vehicle on a flat surface and turn off the engine.
   • Lift the wiper arms away from the windshield.

2. Remove Old Wiper Blades:

   • Locate the release tab on the old wiper blade. This is usually a small lever or button.
   • Press the release tab to detach the wiper blade from the wiper arm.
   • If necessary, use a flathead screwdriver to gently pry the blade off.

3. Clean the Wiper Arm:

   • Use a cloth to clean any dirt or debris from the wiper arms. This will ensure a better fit for the new blades.

4. Attach New Wiper Blades:

   • Take your new wiper blade and align it with the wiper arm.
   • Slide the blade onto the arm until you hear a click, indicating it is securely attached.
   • Ensure the blade is positioned correctly for optimal performance.

5. Repeat for Rear Wiper (if applicable):

   • Follow the same steps to remove and install the rear wiper blade.

6. Test the Wipers:

   • After installation, lower the wiper arms back onto the windshield.
   • Start your vehicle and test the wipers to ensure they operate smoothly and efficiently.

7. Final Check:

   • Check your visibility and make sure the wipers are properly clearing water and debris from the windshield.

Enjoy your clear view and safe driving with your new Windshield Wiper Blade Set!