Installation Instructions for Front Brake Pads Compatible with V7 Racer Special, Nevada 750, Breva 750, and 850 Motorcycles

Preparation before Installation:

Before you begin the installation process, please ensure you have the following tools and materials ready:

Tools Required:

1. Socket wrench (usually 12mm or 14mm, depending on your motorcycle)
2. Torque wrench
3. Phillips screwdriver
4. Flathead screwdriver
5. Brake cleaner
6. Brake pad spreader tool (optional, for easier installation)
   7.Clean rags or cloth
7. Safety goggles and gloves

Installation Steps:

1. Safety First:

   • Put on your safety goggles and gloves before starting the installation.
   • Ensure your motorcycle is on a stable surface and the engine is turned off.

2. Remove the Front Wheel:

   • Use the socket wrench to remove the front wheel's axle nut and carefully take out the wheel.
   • Place the wheel on a clean surface.

3. Access the Brake Caliper:

   • Locate the brake caliper attached to the disc.
   • Remove the bolts securing the caliper using the socket wrench. Set aside the caliper without disconnecting the brake lines.

4. Remove Old Brake Pads:

   • Carefully slide out the old brake pads from the caliper.
   • Use the flathead screwdriver to gently pry them out if they're stuck.

5. Clean the Caliper:

   • Use brake cleaner and a clean rag to clean the caliper and remove any dust or debris.

6. Install New Brake Pads:

   • Take your new brake pads and position them in the caliper.
   • Ensure they fit snugly and are correctly aligned with the caliper and rotor.

7. Reinstall the Brake Caliper:

   • Carefully slide the caliper back over the brake rotor and reattach it with the bolts.
   • Use the torque wrench to tighten the bolts to the manufacturer's specifications.

8. Reinstall the Front Wheel:

   • Place the front wheel back onto the axle, ensuring it’s properly seated.
   • Use the socket wrench to secure the axle nut tightly.

9. Test the Brakes:

   • Before taking the motorcycle for a ride, gently pump the brake lever a few times to set the new pads.
   • Check for any unusual noises or issues.

10. Final Check:

    • Ensure everything is tightly secured and clean.
    • Dispose of old brake pads appropriately.

Conclusion:

Your new front brake pads are now installed and ready for use. Enjoy enhanced braking performance and safety on your rides, whether you’re commuting in the city or embarking on a long-distance journey!